Cricket flour may be used as an additive to consumer foods such as pasta, bread, crackers, and cookies. The cricket flour is being used in protein bars, pet foods, livestock feed, nutraceuticals, and other industrial uses. The United Nations says the use of insect protein, such as cricket flour, could be critical in feeding the growing population of the planet while being less damaging to the environment.[58]
As illustrated above, the pitch is marked at each end with four white painted lines: a bowling crease, a popping crease and two return creases. The three stumps are aligned centrally on the bowling crease, which is eight feet eight inches long. The popping crease is drawn four feet in front of the bowling crease and parallel to it; although it is drawn as a twelve-foot line (six feet either side of the wicket), it is, in fact, unlimited in length. The return creases are drawn at right angles to the popping crease so that they intersect the ends of the bowling crease; each return crease is drawn as an eight-foot line, so that it extends four feet behind the bowling crease, but is also, in fact, unlimited in length.[62]
Some species, such as Gryllus assimilis, take off, fly, and land efficiently and well, while other species are clumsy fliers.[1] In some species, the hind wings are shed, leaving wing stumps, usually after dispersal of the insect by flight. In other species, they may be pulled off and consumed by the cricket itself or by another individual, probably providing a nutritional boost.[12]
Females are generally attracted to males by their calls, though in nonstridulatory species, some other mechanism must be involved. After the pair has made antennal contact, a courtship period may occur during which the character of the call changes. The female mounts the male and a single spermatophore is transferred to the external genitalia of the female. Sperm flows from this into the female's oviduct over a period of a few minutes or up to an hour, depending on species. After copulation, the female may remove or eat the spermatophore; males may attempt to prevent this with various ritualised behaviours. The female may mate on several occasions with different males.[18]
Wikidata: Q47328 Wikispecies: Gryllidae ADW: Gryllidae BugGuide: 157 EoL: 996 EPPO: 1GRYLF Fauna Europaea: 11894 Fauna Europaea (new): e41b54e5-d3fd-440f-8284-b0868db9eeb3 Fossilworks: 56642 GBIF: 5925 iNaturalist: 52884 IRMNG: 101559 ITIS: 102281 NBN: NBNSYS0000160090 NCBI: 6995 NZOR: c2302870-ffdc-4c08-a101-420d9b8cf47f Orthoptera Species File: 1616 uBio: 5477586

In 1876–77, an England team took part in what was retrospectively recognised as the first-ever Test match at the Melbourne Cricket Ground against Australia.[47] The rivalry between England and Australia gave birth to The Ashes in 1882, and this has remained Test cricket's most famous contest.[48] Test cricket began to expand in 1888–89 when South Africa played England.[citation needed]
If the match has only a single innings per side, then a maximum number of overs applies to each innings. Such a match is called a "limited overs" or "one-day" match, and the side scoring more runs wins regardless of the number of wickets lost, so that a draw cannot occur. If this kind of match is temporarily interrupted by bad weather, then a complex mathematical formula, known as the Duckworth-Lewis method after its developers, is often used to recalculate a new target score. A one-day match can also be declared a "no-result" if fewer than a previously agreed number of overs have been bowled by either team, in circumstances that make normal resumption of play impossible; for example, wet weather.[66]
While the umpire (1) in shot stands at the bowler's end of the pitch, his colleague stands in the outfield, usually in or near the fielding position called "square leg", so that he is in line with the popping crease (7) at the striker's end of the pitch. The bowling crease (not numbered) is the one on which the wicket is located between the return creases (12). The bowler (4) intends to hit the wicket (9) with the ball (5) or, at least, to prevent the striker (8) from scoring runs. The striker (8) intends, by using his bat, to defend his wicket and, if possible, to hit the ball away from the pitch in order to score runs.
The phylogenetic relationships of the Gryllidae, summarized by Darryl Gwynne in 1995 from his own work (using mainly anatomical characteristics) and that of earlier authors,[a] are shown in the following cladogram, with the Orthoptera divided into two main groups, Ensifera (crickets sensu lato) and Caelifera (grasshoppers). Fossil Ensifera are found from the late Carboniferous period (300 Mya) onwards,[31][32] and the true crickets, Gryllidae, from the Triassic period (250 to 200 Mya).[1]
The batsman on strike (i.e. the "striker") must prevent the ball hitting the wicket, and try to score runs by hitting the ball with his bat so that he and his partner have time to run from one end of the pitch to the other before the fielding side can return the ball. To register a run, both runners must touch the ground behind the popping crease with either their bats or their bodies (the batsmen carry their bats as they run). Each completed run increments the score of both the team and the striker.[106]
A skilled batsman can use a wide array of "shots" or "strokes" in both defensive and attacking mode. The idea is to hit the ball to the best effect with the flat surface of the bat's blade. If the ball touches the side of the bat it is called an "edge". The batsman does not have to play a shot and can allow the ball to go through to the wicketkeeper. Equally, he does not have to attempt a run when he hits the ball with his bat. Batsmen do not always seek to hit the ball as hard as possible, and a good player can score runs just by making a deft stroke with a turn of the wrists or by simply "blocking" the ball but directing it away from fielders so that he has time to take a run. A wide variety of shots are played, the batsman's repertoire including strokes named according to the style of swing and the direction aimed: e.g., "cut", "drive", "hook", "pull".[105]
Additional runs can be gained by the batting team as extras (called "sundries" in Australia) due to errors made by the fielding side. This is achieved in four ways: no-ball, a penalty of one extra conceded by the bowler if he breaks the rules;[108] wide, a penalty of one extra conceded by the bowler if he bowls so that the ball is out of the batsman's reach;[109] bye, an extra awarded if the batsman misses the ball and it goes past the wicket-keeper and gives the batsmen time to run in the conventional way;[110] leg bye, as for a bye except that the ball has hit the batsman's body, though not his bat.[110] If the bowler has conceded a no-ball or a wide, his team incurs an additional penalty because that ball (i.e., delivery) has to be bowled again and hence the batting side has the opportunity to score more runs from this extra ball.[108][109]
According to the social historian Derek Birley, there was a "great upsurge of sport after the Restoration" in 1660.[23] Gambling on sport became a problem significant enough for Parliament to pass the 1664 Gambling Act, limiting stakes to £100 which was, in any case, a colossal sum exceeding the annual income of 99% of the population.[23] Along with prizefighting, horse racing and blood sports, cricket was perceived to be a gambling sport.[24] Rich patrons made matches for high stakes, forming teams in which they engaged the first professional players.[25] By the end of the century, cricket had developed into a major sport which was spreading throughout England and was already being taken abroad by English mariners and colonisers – the earliest reference to cricket overseas is dated 1676.[26] A 1697 newspaper report survives of "a great cricket match" played in Sussex "for fifty guineas apiece" – this is the earliest known match that is generally considered top-class.[27][28]
The Hambledon Club was founded in the 1760s and, for the next twenty years until the formation of Marylebone Cricket Club (MCC) and the opening of Lord's Old Ground in 1787, Hambledon was both the game's greatest club and its focal point.[citation needed] MCC quickly became the sport's premier club and the custodian of the Laws of Cricket. New Laws introduced in the latter part of the 18th century included the three stump wicket and leg before wicket (lbw).[37]
The match details, including runs and dismissals, are recorded by two official scorers, one representing each team. The scorers are directed by the hand signals of an umpire (see image, right). For example, the umpire raises a forefinger to signal that the batsman is out (has been dismissed); he raises both arms above his head if the batsman has hit the ball for six runs. The scorers are required by the Laws to record all runs scored, wickets taken and overs bowled; in practice, they also note significant amounts of additional data relating to the game.[83]
Cricket has close historical ties with Australian rules football and many players have competed at top levels in both sports.[136] In 1858, prominent Australian cricketer Tom Wills called for the formation of a "foot-ball club" with "a code of laws" to keep cricketers fit during the off-season. The Melbourne Football Club was founded the following year, and Wills and three other members codified the first laws of the game.[137] It is typically played on modified cricket fields.[138]

If a fielder is injured or becomes ill during a match, a substitute is allowed to field instead of him, but the substitute cannot bowl or act as a captain. The substitute leaves the field when the injured player is fit to return.[74] The Laws of Cricket were updated in 2017 to allow substitutes to act as wicket-keepers,[75] a situation that first occurred when Mumbai Indians' wicket-keeper Ishan Kishan was injured in a match on 18 April 2018.[76]